[P3D V4][P3D V5] JustFlight BAE-146 Professional V1.6.2

  Following on from their award-winning L-1011 Tristar Professional, Hawk T1/A Advanced Trainer and PA-28 family of aircraft, this highly de...

 


Following on from their award-winning L-1011 Tristar Professional, Hawk T1/A Advanced Trainer and PA-28 family of aircraft, this highly detailed simulation of the 146 regional jet has been developed by Just Flight's in-house team following comprehensive, hands-on research with a real-life aircraft, G-JEAO, which retired from service with British European Airways in 2000 and is now preserved at the de Havilland Aircraft Museum, and the CC.Mk2 and C.Mk3 aircraft of Royal Air Force, 32 (The Royal) Squadron.

 

Just Flight are excited to bring you the 146 ‘Whisper Jet’ – featuring the 100, 200 and 300 series of this classic British airliner. The design process of what was to become the 146-100 began under Hawker Siddeley in 1973 where the iconic high T-tail, short undercarriage, four engines and distinctive airbrake were chosen to produce a regional airliner with short-field performance and quiet operation. The 146-100 first flew in 1981, followed by the stretched 200 series in 1982 and 300 series in 1988.


The Royal Air Force purchased three 146-100s in 1986 and these were operated by The Queen's Flight, designated the CC.Mk2 ‘Statesman’ and equipped with VIP cabins. The aircraft were used to transport the British Royal family and senior members of the UK military and government.


The 146 was also popular with cargo airliners due to its excellent capacity and low engine noise, allowing for night flights into city-based airports. Two cargo variants were developed, the convertible passenger and freight variant (QC) and the freight-only Quiet Trader (QT). The Royal Air Force now operates two 200QC aircraft, designated the C.Mk3.


Eight variants of the 146 are included in this product – the 100 to 300 passenger variants, the 200QC and QT, 300 QT, RAF CC.Mk2 ‘Statesman’ and C.Mk3 – offering a wide variety of configurations, ranges and flight operations across the globe.


The exterior models are stunningly detailed, featuring 4096 textures for incredible clarity and the latest Physical Based Rendering (PBR) material technology to produce realistic metallic, plastic and glass surfaces (requires Prepar3D v4.4 and above). Realistic animations include trailing-edge flap mechanisms, spoilers and large tail-mounted airbrake, and all passenger and cargo doors.


Moving to the cockpit, the Captain and First Officer positions are modelled with hundreds of functional switches, knobs and controls. The aircraft features complex and detailed custom-coded systems, including hydraulic, electrical, fuel and pressurisation, and the cockpit is also fitted with a functional Thrust Management System (TMS) and comprehensive navigation equipment, including an FMC.


The aircraft are brought to life with immersive dynamic lighting and 3D sounds, with unique flight dynamics for each variant and custom effects from condensation and contrails to realistic exterior lighting.


The 146 was flown all around the world and over 30 airline liveries from the UK, USA, Europe and Australia are included, including many iconic airlines and paint schemes.


Detailed Description


MODEL


  • Eight variants of the 146 are included:
     - 146-100
     - 146-200
     - 146-300
     - 146-200 QC & QT (cargo)
     - 146-300 QT (cargo)
     - CC.Mk2 (RAF VIP configuration with countermeasure pods)
     - C.Mk3 (RAF cargo configuration with countermeasure pods)
  • Accurately modelled using real-world aircraft plans and comprehensive photography of the real aircraft (G-JEAO, ZE701 and ZE708)
  • Numerous animations including:
     - Trailing edge flap surfaces
     - Wing-mounted spoilers and tail-mounted airbrake
     - All passenger, service and cargo doors
     - Windscreen wipers
     - Distinctive retractable tricycle landing gear
     - Countermeasure pods, HF aerial and more
  • Physical Based Rendering (PBR) materials produce realistic metallic, plastic and glass surfaces (requires Prepar3D v4.4 and above)
  • 4096x4096 textures are used to produce the highest possible texture clarity (optional 2048x2048 textures available via a switcher tool)
  • Authentic labelling and placards based on those found in the real aircraft


COCKPIT


  • Captain and First Officer positions are modelled with hundreds of functional switches, knobs and controls
  • A truly 3D cockpit environment right down to accurately modelled seat belts and screw heads - every instrument is constructed fully in 3D with smooth animations
  • Cockpit textures feature wear and tear based on reference photos taken in the real aircraft to produce an authentic environment
  • Interactive checklists for every stage of flight
  • Panel state system which will automatically save the panel state whenever a flight is saved and reload the panel state whenever that flight is loaded
  • Aircraft configuration system that will allow you to choose between 'cold & dark' or 'ready for take-off'
  • Many features have been added to help with usability such as the ability to hide the control yokes for a better view of the instruments and pre-set angled views for the overhead panel, centre pedestal and jump seat
  • Flight computer panel with useful information such as fuel burn, endurance, speed and wind speed/direction


LIVERIES


The 146 comes with a variety of airline liveries from the UK, USA, Australia, Europe and more. A Paint Kit is available to download from the Support section.


146-100


  • Air France Express (G-JEAT)
  • AirUK (G-UKPC)
  • British Aerospace demonstrator (G-SSSH)
  • Dan-Air London (G-BKMN)
  • Formula One Flight Operations (G-OFOM)
  • Jersey European (G-JEAO)
  • Pacific Southwest Airlines (N246SS)
  • United Express (N463AP)

146-200


  • AirCal (N146AC)
  • Air Canada Jazz (C-GRNZ)
  • American Airlines (N699AA)
  • Continental Express (N406XV)
  • QantasLink (VH-NJJ)
  • SN Brussels Airlines (OO-DJJ)
  • USAir (N165US)

146-200QC


  • TNT Airways (OO-TAZ)
  • Titan Airways (G-ZAPK)

146-200QT


  • TNT Airways 1990s (G-TNTA)
  • Ansett Australia Airlines Cargo (VH-JJZ)
  • Titan Airways (G-ZAPR)

146-300


  • Aer Lingus (EI-CTO)
  • Air New Zealand (ZK-NZN)
  • Ansett Australia (VH-EWM)
  • Astra Airlines (SX-DIZ)
  • British Airways (G-OINV)
  • Flybe (G-JEBC)
  • KLM UK (G-UKAC)

146-300 QT


  • ASL Airlines (EC-MID)
  • Australian Air Express (VH-NJM)
  • TNT Airways (OO-TAD)

CC.Mk2


  • RAF Statesman modern (ZE701 – Queen’s Flight)
  • RAF Statesman 1980s (ZE701 – Queen’s Flight)

C.Mk 3


  • RAF (ZE708)


SYSTEMS


Custom-coded aircraft systems with a high degree of complexity and depth, including:


Air-conditioning and pressurisation system:


  • Automatic and manual pressurisation modes with control of outflow valves, barometric and cabin rate settings, indications and cabin altitude warnings
  • Cabin altitude and differential values based on real-world data
  • Automatic and manual flight deck and cabin temperature control – takes account of ambient temperature, air supply from the engines and/or APU, fresh or recirculated air and even whether the doors are open!


Auto-flight system:


  • Autopilot and flight director system with multiple modes:
     - Pitch - Altitude arm and hold, vertical speed, IAS, Mach, glideslope and go-around
     - Roll – VLOC, BLOC, LNAV (FMC) and HDG
     - Turbulence mode
     - Pitch and bank selection and hold
     - Sync mode for quick changes to aircraft attitude
     - Fully functional mode annunciations, engagement and disengagement criteria (including roll and pitch rate cut-out and stall cut-out) and integration with ADI and HSI
  • Simulated CAT 2 approach monitoring system


Flight Management Computer:


  • Custom-coded UNS-1 FMC for accurate navigation
  • Navigraph database support for up-to-date AIRAC cycles
  • Lateral navigation integration with LNAV autopilot mode and HSI
  • Vertical navigation information for use with autopilot pitch modes
  • Ability to create full flight plans with import and export functions
  • SID and STAR support
  • Fuel management, performance, radio tuning and more


Communication system:


  • Dual VHF COMM, NAV and ADF radios
  • Cockpit voice recorder test and indication systems
  • Functioning audio selector and PA chime


Electrical system:


  • Independent engine, APU and external power (AC and DC) sources
  • Generator and TRU loading, and automatic load switching
  • Standby generator and inverter power sources for non-normal procedures
  • Independent AC channels, including normal, essential and emergency busbars, and bus-ties facilities


Fire protection system:


  • Engine, APU and fuselage fire detection and warning systems
  • Engine fire extinguishing system
  • Fully simulated test functionality


Flight controls:


  • Servo-tab simulation – elevator and aileron surfaces position is dependent on servo-tab control puts and air flow over the surface
  • Iconic tail-mounted airbrakes, roll and lift spoilers with independent hydraulic sources, realistic deployment times and custom AC and PTU pump sounds
  • Flight control disconnect and yoke control lock functionality
  • Accurately simulated flap system with hydraulic and electrical power sources, baulk override, fault testing and iconic howl when deployed in the air
  • Stall identification and warning systems, including stick shaker and pusher, and inhibit mode
  • Simulated configuration warning system


Fuel system:


  • Realistic fuel load and burn based on real-world data
  • Simulated electrical normal and hydraulic standby fuel pumps, centre and wing tanks with feed tanks for each engine, and LP and HP fuel cocks
  • Fully functional centre-to-wing fuel transfer, cross-feed and common-feed valves


Hydraulic system:


  • Independent yellow and green hydraulic systems with realistic pressure, quantity and supply to other systems
  • Simulated AC and DC-driven backup pumps and power transfer unit (PTU)
  • Functional standby generator for supplying AC and DC electrical power in non-normal situations


Ice and rain protection system:


  • Ice detection and accumulation simulation, anti-icing and de-icing functionality for exterior surfaces, warning systems for in-flight monitoring
  • Simulation of separate inner and outer wing anti-icing, and windscreen overheating


Indicating and recording systems:


  • A vast array of annunciators, including accurately simulated Master Warning System (MWS) with amber and red cautions, audible warnings and ground testing for all systems
  • Flight Data Entry Panel (FDEP) for entering flight details (date, flight leg and number)


Landing gear:


  • Normal and emergency gear extension, including gear down-lock override
  • Gear configuration indication and warning systems
  • Simulated brake accumulators supplied via the hydraulic power sources (yellow or green), anti-skid and brake temperature indicator with cooling down periods that are affected by ambient temperature, brake usage and brake fans
  • Captain and First Officer tillers for realistic nose-wheel steering


Navigation systems:


  • Transponder with TCAS (integrated with VSI TCAS display) and flight ID input functionality
  • Dual RMI/DBI and HSI navigation instruments, fed by two NAV and ADF radios
  • Instrument source selector for NAV 1, NAV 2 or dual navigation via the ADI, HSI and auto-flight system
  • Choice of traditional or TCAS VSI
  • Fully functioning test modes on navigation instruments (e.g. HSI, radio altimeter and ADI)
  • Weather radar with Active Sky compatibility and map function (weather mode requires Active Sky for P3D)
  • Custom-coded GPWS with modes 1-6, steep approach mode, flap warning override and test functionality


Oxygen system:


Flight crew and passenger oxygen systems with valve and mask deployment controls.



Pneumatic system:


Realistic bleed air demand from engines and APU, and pneumatic supply to air-conditioning and ice protection systems.



APU:


  • Realistic APU start and shutdown procedures, and bleed air and electrical power supply
  • RPM, TGT and fuel burn values based on real-world data


Doors and stairs:


  • Animations panel for controlling passenger and service doors, lower cargo doors and fuselage cargo door (QT/QC only)
  • Deployable airstairs, powered by AC hydraulic system


Powerplant:


  • N1, N2, TGT, oil pressures and temperatures will all differ subtly between engines
  • Accurately simulated Thrust Modulation System (TMS) with take-off (full or flexible), max continuous thrust, TGT and descent modes. Takes account of engine bleed air requirements e.g. for to air-conditioning and ice protection systems.
  • Realistic engine start procedures with external, APU or cross-start sources
  • Simulation of ground and flight idle baulks
  • Take-off and landing speed card which automatically displays reference speeds depending on current aircraft weight, and settable airspeed indicator and engine instrument bugs


Lighting:


  • Independent lighting controls for Captain and First Officer
  • Dimmable integral lighting for each panel
  • Dimmable dynamic flood and storm lighting for a highly immersive and customisable night environment (more than 10 individual light sources including entry, lap, sill and flight kit) – Prepar3D v5 only
  • White and red flashlight for night operations – Prepar3D v5 only
  • Accurately simulated exterior lighting including wing, logo and runway exit lights, and taxi/landing and navigation lights with different intensities


Sounds:


  • Studio quality Lycoming ALF-502 engine noise recorded from RAF C.Mk3 ZE708
  • Over 450 flight deck sound effects recorded from RAF CC.Mk2 ZE701
  • Detailed equipment audio such as the APU, brake fans, electrical circuits, hydraulic equipment and many more
  • Distinctive flap retraction/extension airflow 'howling' sound
  • Accurate 3D placement of sounds


FDE and effects:


  • Realistic and accurate performance in the air and on the ground, using unique flight models for all variants based on real-world performance and handling data, and input from real-world 146 pilots.
  • Custom effects for enhanced immersion, including engine exhaust, wing condensation, cruise contrail, and ground splash in wet/snowy conditions from all six landing gear wheels.
  • Complete exterior lights package as seen on the real 146 including landing, wing, runway, logo and taxi lights that illuminate objects and the ground, for ease of operation during the hours of darkness.


Other features:


  • Manual (245 pages) – tutorial, FMC guide, procedures, limitations and handling notes
  • Payload manager for realistic fuel and passenger loads, with route entry for calculating required fuel
  • Custom GSX profiles
  • Multiple interior and exterior viewpoints, including wing views
  • PSD paint kits included so you can create your own paint schemes

V1.6.2

FMC fixes (SID/STAR selection, DTO)

(further FMC changes are in progress)

V1.61


Custom sounds causing audible artefacts (‘popping’) – fixed

Various tweaks to EFB logic for more accurate payload management



v1.6

-Added EFB-provides control of animation, announcement, fuel and passenger capacity (please refer to the FAQ here)

-Change the fuel gauge to kilograms to match other indicators

-Now you can set N1 and TGT errors when the power is turned off, and you can save/restore locations through the panel state

-Landslide/locator capture problem after using RNAV

-Fixed-FDE changes (cruising attitude, stability in IAS/MACH mode)

-When flying from VOR, HS​​I CDI now works normally-Smaller paint fix

-Various improvements to the custom sound system

-Adjusted cabin announcement-Added new wing view

-Fixed 300QT GSX configuration file-After the engine is started with a low N1 value, the low pressure of the engine's anti-icing inlet remains lit

-Fixed-Adjust the air conditioning system (for example, the cockpit and cabin fans now affect the temperature change rate)

-Now you can only select the power icon and menu status options on the ground to avoid accidental selection during flight

-Further improved GSX compatibility (for example, the door will now open/close automatically, and the flight attendant arm/disarm door announcement triggered by the GSX boarding/boarding status)

-The animation panel now indicates when to open the door, extend the stairs or enable the clickspot of the GPU-Speeds card will now also set N1 and TGT errors

-FMC repair (including DTO)


Installer + Manual









Name

AIRAC,2,MSFS Airplanes,25,MSFS Airport,61,MSFS Bush trips,3,MSFS Liveries,3,MSFS Scenery,85,P3D V4 Airplanes,16,P3D V4 Airports,15,P3D V5 Airplanes,20,P3D V5 Airports,15,Utilities,28,
ltr
item
FlightSimAddons©: [P3D V4][P3D V5] JustFlight BAE-146 Professional V1.6.2
[P3D V4][P3D V5] JustFlight BAE-146 Professional V1.6.2
https://1.bp.blogspot.com/-bqHXeHnA1R0/X9ZfPHQES3I/AAAAAAAAK8w/jrKnJ3qvqLEBxwmuPm_LH4ANi4-9Jm83QCLcBGAsYHQ/w640-h360/146-professional-p3d_178_ss_l_201123103924.jpg
https://1.bp.blogspot.com/-bqHXeHnA1R0/X9ZfPHQES3I/AAAAAAAAK8w/jrKnJ3qvqLEBxwmuPm_LH4ANi4-9Jm83QCLcBGAsYHQ/s72-w640-c-h360/146-professional-p3d_178_ss_l_201123103924.jpg
FlightSimAddons©
https://www.flightsimaddons.net/2020/12/p3d-v4p3d-v5-justflight-146-professional.html
https://www.flightsimaddons.net/
https://www.flightsimaddons.net/
https://www.flightsimaddons.net/2020/12/p3d-v4p3d-v5-justflight-146-professional.html
true
8746803424911836221
UTF-8
Loaded All Posts Not found any posts VIEW ALL Readmore Reply Cancel reply Delete By Home PAGES POSTS View All RECOMMENDED FOR YOU LABEL ARCHIVE SEARCH ALL POSTS Not found any post match with your request Back Home Sunday Monday Tuesday Wednesday Thursday Friday Saturday Sun Mon Tue Wed Thu Fri Sat January February March April May June July August September October November December Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec just now 1 minute ago $$1$$ minutes ago 1 hour ago $$1$$ hours ago Yesterday $$1$$ days ago $$1$$ weeks ago more than 5 weeks ago Followers Follow THIS PREMIUM CONTENT IS LOCKED STEP 1: Share to a social network STEP 2: Click the link on your social network Copy All Code Select All Code All codes were copied to your clipboard Can not copy the codes / texts, please press [CTRL]+[C] (or CMD+C with Mac) to copy Table of Content