[MSFS] Garmin GNS530 GPS Enhancement Pack V.1.0.17 | FlightSimAddons©

[MSFS] Garmin GNS530 GPS Enhancement Pack V.1.0.17

  V 1.0.17 Software version added initialisation screen freeze when using a POI into the flight plan bug resolved. Automatic detection of th...

 


V 1.0.17

Software version added initialisation screen

freeze when using a POI into the flight plan bug resolved.

Automatic detection of the GNS530 by the GNS4330 in cold and start mode bug resolved


V 1.0.15

Code cleanup

Thumbnail added for content manager

Selection waypoint page rebuilt

Added missing images for GNS430


V 1.0.14

Compatibility with update 1.11.16.0 code
in airport WP pages: the GNS freeze if selecting an empty menu bug resolved.
Airspace status was not displayed correctly in near airspace page bug resolved.
ILS name display overflow in VOR/COM part bug resolved.
Near airspace list extended to 4 items
Automatically disabling of GNS430 maps in dual 530/430 configuration (Cessna 172). This is because a MSFS bug causes a CTD if using more than 4 maps for the same aircraft.


V 1.0.13

Disabling maps in gns430 since the sim only accepts a total of 4 maps by aircraft and crashes if there are more.

Wind indicator in map page not displayed at the correct place when data was displayed

Pushing ENT button on selected FPL waypoint displays the corresponding waypoint page

Coordinates displayed with leading and trailing zeros

While in direct To mode, another direct To target can be selected from FPL

Waypoint selection: the CLR button displays the previous value

Added Maps for approaches, STARs, SIDs and runways

Waypoint pages rebuilt


V 1.0.11

Better management of direct to an approach WP (manual approach reactivation not needed any more)

Correcting some flight plan distances

Few bug corrections

V 1.0.10

Adding flight plan loading (see details)

Adding wind indicator

Correcting some flight plan distances


V 1.0.9

Adding VNAV page (experimental)

Adding night/day lighting in default NAV page menu

Dynamic flight plan page

DirectTo map leg larger

Airspace lines thinner

Adding a "cancel directTo" item menu in DirectTo page


V 1.0.8


Compatibility with MSFS update 1.10.7.0


V 1.0.7

The CDI look and behavior conform to the original

Added a BRG mark to the default NAV page compass

Added a terrain map NAV page

Always one decimal on DIS and XTK displays

Radio part look conform to the original

Changed colors

Bug correction: activate approach not always working

Bug correction: FPL leg updated after activating approach

Some minor corrections


V 1.0.6

First declutter level hides roads and airspaces

DME distance correctly rounded

LOC Radial not any more displayed as in the original GNS530. LOC name displayed instead (ex ILS RW 31).

Adding compass in track up map mode

Default NAV page is in track up mode by default

Adding range levels to 2000nm

Prevent changing the TRK field (like original GNS530) in default NAV

Better management of the CLR button in NAV pages

Map page completely rebuilt

Frequency NAV page works now nearly like original GNS530

Flight plan has now 7 lines instead of 4 (5 vs 4 in GNS430)

Depart and destination now displayed in flight plan


Flight plan columns conform to the original GNS530 (added DTK and changed order)


V 1.0.5

Fixing the conflict when using 2 or more GPS in an aircraft

Works now with Cessna 172

Some small enhancements and bug corrections

Modified GNS430 now included

Adding TRK indicator


V 1.0.4

Big mistake in v1.0.03 with track up half working

The DirectTo behavior is now nearly similar to that of the native GNS530

Adding toggle of map orientation in map menu (North up or Track up)

Better management of the CLR button when inserting a waypoint

Prevent add/removing of waypoints in approach sequence (for now)

Bug correction: crash in load approach page when loading and there is no approach available

Adding confirmation window when removing approach, SID, STAR or waypoint

Removing approach, SID and STAR works by selecting the corresponding line on flight plan

Less dependency from other Mods



V 1.0.2

LOC/VOR correctly displayed in the VOR field following the captured frequency

Setting 4 levels of declutter as the original GNS530

Adding the range and declutter level in the NAV map (left bottom corner)

Adding missing symbol files associated to waypoint, airports, etc...

No more flicking pages (I hope)

The NAV/COM page now works


V 1.0.1

World4Fly Mod integration (Wrong radial and Rounded DME)

NAV page now displays ETE to next waypoint instead of ETE to destination

First release features:

Better logic for approach loading and activation

Correcting the crazy U-turn bug

Activate leg now works on approach waypoints

Better DirectTo management and possibility to Direct to an approach icao waypoint

Bug correction when direct to an airport: it was then impossible to select an approach

Remove approach is now working

Activate approach is not selectable if not relevant (ex already activated or no approach)

Display screen more readable

Airport list: Correcting flicking bug and enhancing the view

Adding a declutter level



Installation: 

Unzip the file in your Community directory.

This is how it works now:

Loading

If you choose an approach and just loading it, it’s added to the fly plan but not activated. It’s then up to the pilot to activate it or not (activate approach in procs menu).


Activating

If you activate the approach before the last Enroute waypoint, the autopilot continue to follow the route and automatically activate the approach after the last Enroute waypoint. If you want to bypass the next Enroute waypoint, do a direct to the first waypoint approach and then activate the approach.

If you activate the approach after the last Enroute waypoint, the autopilot goes directly to the first approach waypoint (without U-turn!!!).

Note: If you set a Direct To, this automatically de-activate the approach.

Note: If you preset an approach from the FS2020 map, this one will be automatically

activated.


U-turn bug

This FS2020 bug probably made many of us crazy. It occurs when you select/activate an approach after the last Enroute waypoint. Then the autopilot comes back to the last Enroute waypoint before reaching the first approach waypoint.

The workaround to this bug implemented here is to remove all Enroute waypoints in this situation. This is not a real problem since you already flew these waypoints.



Activate leg

Activate leg now works also in approach.

Direct to

The Direct To know works correctly and you can direct to an approach icao waypoint. These lasts are available without having to manually type them in the DirectTo FPL element list.

A DirectTo automatically de-activate the approach if there is one.

A direct to an airport removes all the waypoints of the fly plan except origin and (new) destination. When doing that it’s now possible to select an approach for the new

destination (bug correction).


Remove approach

This feature was not working in the original MSFS GNS530. Now it does.

Graphical enhancements

The display screen is more readable. The fonts weight has been turned to “normal” instead of “bold”.

The nearest airport list doesn’t flick any more and a separation line has been added between airports for better reading. I don’t know if this works like this in the real GNS530 but I took the responsibility to do it (sorry for the purists if it’s not exactly like in real life).

A third declutter level has been added (declutter works by clicking the CLR button while in map view). I really don’t understand how the declutter works in MSFS but it seems that there are 3 declutter levels depending of the zoom level. Sometimes it works, sometimes not.

Activate approach is not selectable if not relevant (ex already activated or no approach).




Name

MSFS Airplanes,57,MSFS Airport,152,MSFS Bush trips,5,MSFS Liveries,4,MSFS Scenery,103,P3D V4 Airplanes,26,P3D V4 Airports,69,P3D V5 Airplanes,28,P3D V5 Airports,84,Utilities,45,X-plane Airplanes,7,X-plane scenery,5,
ltr
item
FlightSimAddons©: [MSFS] Garmin GNS530 GPS Enhancement Pack V.1.0.17
[MSFS] Garmin GNS530 GPS Enhancement Pack V.1.0.17
https://1.bp.blogspot.com/-4iJjIa9qxqM/X8PJDAYCrfI/AAAAAAAAKjI/Mybz0Gw10x4CV_-_ygDH9e-YpqXH0YbLwCLcBGAsYHQ/w640-h468/gns-530.jpeg
https://1.bp.blogspot.com/-4iJjIa9qxqM/X8PJDAYCrfI/AAAAAAAAKjI/Mybz0Gw10x4CV_-_ygDH9e-YpqXH0YbLwCLcBGAsYHQ/s72-w640-c-h468/gns-530.jpeg
FlightSimAddons©
https://www.flightsimaddons.net/2020/11/msfs-garmin-gns530-gps-enhancement-pack.html
https://www.flightsimaddons.net/
https://www.flightsimaddons.net/
https://www.flightsimaddons.net/2020/11/msfs-garmin-gns530-gps-enhancement-pack.html
true
8746803424911836221
UTF-8
Loaded All Posts Not found any posts VIEW ALL Readmore Reply Cancel reply Delete By Home PAGES POSTS View All RECOMMENDED FOR YOU LABEL ARCHIVE SEARCH ALL POSTS Not found any post match with your request Back Home Sunday Monday Tuesday Wednesday Thursday Friday Saturday Sun Mon Tue Wed Thu Fri Sat January February March April May June July August September October November December Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec just now 1 minute ago $$1$$ minutes ago 1 hour ago $$1$$ hours ago Yesterday $$1$$ days ago $$1$$ weeks ago more than 5 weeks ago Followers Follow THIS PREMIUM CONTENT IS LOCKED STEP 1: Share to a social network STEP 2: Click the link on your social network Copy All Code Select All Code All codes were copied to your clipboard Can not copy the codes / texts, please press [CTRL]+[C] (or CMD+C with Mac) to copy Table of Content